Govee

• Device comes back onlineRuns when a Govee device that was offline connects again. Each check uses one request from your Govee key's daily allowance, so watch only the devices you need.
• Device goes offlineRuns when a Govee device loses its connection, such as a plug that lost Wi-Fi or a sensor whose batteries ran out. Each check uses one request from your Govee key's daily allowance, so watch only the devices you need.
• Device turned offRuns when a Govee light, plug or appliance is turned off, however it was turned off. Each check uses one request from your Govee key's daily allowance, so watch only the devices you need.
• Device turned onRuns when a Govee light, plug or appliance is turned on, from the Govee Home app, a switch, a voice assistant or a workflow. Each check uses one request from your Govee key's daily allowance, so watch only the devices you need.
• Reading crosses a levelRuns when a Govee sensor's temperature, humidity or CO2 reading rises above or falls below a level you set, such as a freezer warming past -10. It runs once each time the level is crossed, not while the reading stays there. Each check uses one request from your Govee key's daily allowance, so watch only the devices you need.

• List devicesList the devices in your Govee Home account, with each one's name, model and what it can do.
• Get device stateGet what a device is doing now: whether it is online and on, its brightness and colour, and a sensor's temperature or humidity.
• List scenesList a light's scenes, the DIY scenes made for it in the Govee Home app, and its snapshots.
• Turn on or offTurn a light, plug or appliance on or off.
• Set brightnessSet a light's brightness, from 1 (dimmest) to 100 (brightest).
• Set colourSet a light to one colour, such as #FF8800 or blue.
• Set colour temperatureSet a light to a shade of white, in Kelvin: lower is warmer, higher is cooler. Each light has its own range, often 2000 to 9000.
• Apply scenePlay one of a light's built-in scenes, such as Sunrise or Aurora.
• Apply DIY scenePlay a DIY scene made for a light in the Govee Home app.
• Apply snapshotPut a light back to a snapshot saved in the Govee Home app.
• Set segment colourColour some parts of a light strip and leave the rest as they are.
• Set segment brightnessDim or brighten some parts of a light strip, from 0 to 100.
• Start music modeMake a light react to sound from its microphone, in one of its music modes.
• Turn a feature on or offTurn one feature of a device on or off, such as a fan's oscillation, a humidifier's night light or a light's gradient.
• Set modeChoose one of a device's modes, such as a night light scene, an HDMI input or a diffuser's preset.
• Set work modeSet how an appliance runs, such as a purifier's or humidifier's manual, auto or sleep mode and its speed.
• Set humidity, volume or another levelSet one of a device's levels other than brightness, such as a humidifier's target humidity, within the device's range.
• Set target temperatureSet the temperature a heater, thermostat or kettle heats to.

No actions match that.