All integrationsDevice Management
Aruba Central
Run your HPE Aruba Networking Central network: check sites, access points, switches and gateways and reboot them, find clients and disconnect them, follow firmware, read the event log and audit trail, and clear or defer alerts.
- actions
- 25
- triggers
- 11
Triggers
Start a workflow when something happens in Aruba Central.
- New alertRuns when Central raises an alert, such as a device down, an access point rebooting or poor channel quality.
- Alert clearedRuns when an alert is cleared, by a person or because the problem went away.
- Device went offlineRuns when an access point, switch or gateway stops reaching Central.
- Device came onlineRuns when an access point, switch or gateway reaches Central again, or for the first time.
- Device addedRuns when a device is added to the account's inventory.
- New siteRuns when a site is added to Central.
- New eventRuns for each new entry in a site's event log, such as a failed sign-in, a port going down or a device restarting.
- New audit trail entryRuns when someone changes something in Central, in its screens or through the API, with who did what.
- Client connectedRuns when a phone, laptop or other client connects at a site.
- Client failed to connectRuns when a client at a site starts failing to connect, such as a wrong password or no IP address.
- Firmware update recommendedRuns when Central recommends a different firmware version for a device than the one it runs.
Actions
Steps a workflow can run in Aruba Central.
- List sitesList the account's sites with their addresses, how many devices and clients each has, open alerts and health.
- Get site healthGet a site's health: how much of it is good, fair and poor, why, and the same for each kind of device and client.
- List devicesList the access points, switches and gateways Central monitors, with whether each is online, its model, firmware, IP address and site.
- List device inventoryList every device in the account's inventory, whether or not it is assigned to a site, with its subscription and provisioning state.
- Update device notesReplace the notes Central keeps on a device, such as where it is mounted or who looks after it.
- List access pointsList access points with their status, clients, CPU and memory use, firmware and site.
- Get access pointGet one access point in full: its status, radios and their channels, Ethernet ports, the WLANs it broadcasts, and why it last restarted.
- List switchesList switches with their status, model, firmware, IP address, stack and site.
- Get switchGet one switch in full: its health and why, operating system, role, CPU, memory, PoE and temperature, and why it last restarted.
- List switch portsList a switch's ports with whether each is up, its speed, VLANs, PoE and what is connected to it.
- List gatewaysList gateways with their status, CPU and memory use, firmware, cluster and site.
- Get gatewayGet one gateway in full: its status, role in its cluster, function, CPU and memory use, and why it last restarted.
- List device firmwareList each device's firmware next to the version Central recommends, and whether it is up to date.
- List clientsList the phones, laptops and other devices on the network, wired and wireless, with their IP address, Wi-Fi, user and where they connect.
- Get clientGet one client by its MAC address: whether it is connected, through which device and Wi-Fi, its IP address, user and signal.
- List WLANsList the Wi-Fi networks (WLANs) with their security, bands, VLAN, whether each is on and how many clients use it.
- List alertsList Central's alerts, such as a device down or a radio with poor channel quality, newest first, with each one's key for the other alert steps.
- Clear alertsMark alerts as cleared, with why and an optional note, so they leave Central's active list.
- Defer alertsPut alerts aside until a time you choose, such as the end of a maintenance window; they come back then if still true.
- Make alerts activeMake deferred or cleared alerts active again.
- List eventsList a site's event log, or one device's or client's, such as failed sign-ins, ports going down and devices restarting, newest first.
- List audit trailList who changed what in Central, in its screens or through the API, newest first.
- Reboot deviceRestart an access point, switch or gateway. Everyone connected through it loses their connection until it is back.
- Blink locator lightFlash an access point's or switch's locator light, so someone on site can find it.
- Disconnect clientDisconnect a client from the access point or gateway it is connected through. It may connect again straight away unless something stops it.
No actions match that.
Automate Aruba Central with Lodol.
Connect Aruba Central, then hand Lodol the job in Slack, Claude or ChatGPT.
We’re letting people in a few at a time.